Serving the Provo area  ·  (385) 250-1166  ·  Open Mon-Sun 7am-7pm
📞 (385) 250-1166 Free Quote

Metal Roofing in Lehi, UT (84043) · Local Professionals

Provo Metal Roofing · Fast response in Lehi and the Provo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+256Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lehi's newer subdivisions off Pioneer Crossing and the Timpanogos Highway corridor are full of steep multi-gable roofs, and those tall pitches are exactly where standing seam metal earns its keep. From the Traverse Mountain benches to the older streets near Lehi High School, we see the same issues: wind-driven rain finding seams, ice dams at the eaves, and shingles that take a beating from canyon winds. We know this city's housing stock because we work here every week.

Homeowners in Lehi (84043) call Provo Metal Roofing because we show up when we say we will, we explain the difference between a repair and a replacement in plain terms, and we do not try to sell you a new roof when a $450 leak repair will do. Whether you are near the Outlets at Traverse Mountain or over by the Jordan River Parkway, we are based in Provo and serve Lehi and the surrounding areas.

Metal Roofing in Lehi (84043)

Lehi sits on a mix of bench gravel and silty clay, and that matters for roof work. Newer homes on the Traverse Mountain side often have steep multi-gable designs with complex valleys and tight side yards, so staging materials takes planning. Older properties closer to downtown Lehi have lower pitches and mature trees, which means debris buildup and fasteners that work loose over time. The freeze-thaw cycles here are hard on sealants and flashing, and canyon winds can lift panels that were not fastened to spec. We also see a lot of ice damming on north-facing slopes, especially on homes above the valley floor where snow lingers.

Our team has installed and repaired metal roofs across Utah Valley, from the pioneer brick homes in Provo to the newer subdivisions in Saratoga Springs and Eagle Mountain. In Lehi, we have worked on everything from standing seam retrofits over old shingles to storm damage repairs after a wind event. We know which panel profiles handle snow load and which colors pass HOA review in the larger developments.

Our services in Lehi

How a Job Works in Lehi

Step 1: You call (385) 250-1166 or request a free estimate online. We schedule an on-site assessment, usually within a day or two, and walk the roof with you. We check fasteners, seams, flashing, and attic ventilation, and we take photos so you can see what we see. You get a written scope and a firm price before any work starts.

Step 2: Once you approve, we pull the roofing permit with the City of Lehi and coordinate any HOA design review if your subdivision requires it. On tight lots near the Traverse Mountain benches, we stage materials in the driveway or on the street according to city rules. Our crew protects landscaping and windows, then removes the old roofing or installs the retrofit system depending on your scope. Most residential roofs take two to five days.

Step 3: We clean up every day and do a magnet sweep at the end for nails. You get a final walkthrough where we show you the completed work, explain any maintenance items, and hand over warranty paperwork. We leave your property clean and your roof watertight.

Pricing in Lehi depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10, and metal roof replacement starts at $9. A retrofit over existing shingles starts at $7 per square foot, but keep in mind that code limits how many layers you can recover, so we verify that first. Common repairs like leak fixes start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. Snow guards start at $1,200, and gutters for metal roofs start at $9 per linear foot. We give free estimates and free inspections for storm damage, so call (385) 250-1166 to get a real number for your Lehi home.

My Lehi home has a steep multi-gable roof. Is standing seam the right choice?
For most steep multi-gable homes in Lehi, yes. Standing seam panels handle snow shedding and wind uplift better than exposed fasteners, and the hidden clips mean fewer penetrations. That said, we look at pitch, valley layout, and your HOA guidelines before recommending a profile. We will tell you if a different metal system makes more sense for your roof.
A windstorm just peeled back some panels on my roof in Lehi. How fast can you respond?
We prioritize active leaks and storm damage. Call (385) 250-1166 and we will schedule an inspection, often same or next day depending on volume. We can tarp or secure the area to prevent further damage, then give you a repair scope. We also document the damage for insurance if you plan to file a claim.
What does a typical metal roof repair cost in Lehi?
Most repairs start at $450 for leak diagnosis and repair, and screw replacement or re-fastening starts at $750. Complex flashing or chimney work starts at $600. The final price depends on roof access, how many areas are affected, and whether the issue is isolated or widespread. We give a free estimate before any work begins.
Do I need a permit for a metal roof in Lehi?
A full replacement or re-roof typically requires a permit from the City of Lehi, and inspection requirements vary. We handle the permit application and coordinate inspections as part of the job. If your home is in a historic district or has HOA design review, we help prepare the submittal. Always verify current rules with the Lehi building department.
My HOA has design rules. Can you help with approval for a metal roof?
Yes. Many Lehi subdivisions have architectural review requirements for panel profile and color. We provide product specs, color samples, and installation details to support your HOA submittal. We also respect property line setbacks and coordinate with neighbors if staging or access crosses a line. Just let us know your HOA contact early in the process.
Are you insured for work on my Lehi property?
We are fully insured with general liability and workers' compensation coverage. That protects you and your property if anything goes wrong on the job.
What maintenance should Lehi homeowners do to protect a metal roof?
Clear debris from valleys and gutters before winter, especially if you have cottonwoods or bigtooth maples nearby. Check fasteners and sealant on flashing every couple of years, and after a major wind event, look for lifted panels or loose screws. Snow guards help prevent ice dams at the eaves. We offer inspections if you want a professional set of eyes.
Why choose us?

Trusted professionals in Provo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Provo

All your work handled by qualified professionals in Provo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

256+ Verified Client Reviews in Provo

⭐⭐⭐⭐⭐ 4.9/5 · 256 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Provo · Response within 24h · No commitment · ☎ (385) 250-1166

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Provo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm